Gebruikte Freesmachines in Nederland

SX3L - SIEG - Freesmachine

Item no: Small Mill Drill | Drilling capacity: 25 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 50 mm | Longitudinal axis (x): 400 mm | Cross axis (y): 145 mm | Headstock trav...

Ronde klem voor verdeeltafel

• Fabrikant: Assorts

Item no: / / / / | Amrrv-80: 3" 75mm / 54 mm / 20 mm / 32 mm / 29 mm | Amrrv-105: 4" 100mm / 77 mm / 21 mm / 40 mm / 32 mm

Verdeeltafel

• Fabrikant: Soba

Item no: Rotary Table 150 110242 / Rotary Table 200 110243 / Rotary Table 250 110244 | Table dia: 150mm / 200mm / 250mm | Width of t-slot: M8 / M12 / M12 | Height: 80mm / 130mm / 160mm | Center sleeve: MT2 / MT3 ...

Verdeelplatenset

• Fabrikant: Soba

Item no: Dividing Plate Set 110260 / Dividing Plate Set 110270 | Dividing plate set screw: PCD. 32 - 1.26Ø / (3 Holes) PCD. 46 - 1.81 | Inner dia of sector arm: 21 - 0.83 / 28.7 - 1.12 | Outer dia of spring clip...

SX1P - SIEG - Freesmachine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

SX2LF - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 300 mm | Cross axis (y): 130 mm | Headstock travel (z): 250 mm | Throat: 1...

SX2L - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 300 mm | Cross axis (y): 130 mm | Headstock travel (z): 180 mm | Throat: 1...

SX2.3 - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

SX2P - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 280 mm | Cross axis (y): 140 mm | Headstock travel (z): 260 mm | Throat: 1...

Deckel FP4MA I CNC frezen

• Fabrikant: Deckel / Maho
• Model: FP 4

Conditie: Gebruikt | Besturingseenheid: Deckel Contour 2 | X-as reizen: 485 mm | Y-as reizen: 385 mm | X-as verplaatsing: 485 mm | Z-asverplaatsing: 380 mm | Y-as verplaatsing: 385 mm | Tafellengte: 700 mm | Z-as...