Gebruikte variable speed in Utrecht, Nederland

Table positioner with two degrees of freedom: rotation (motorized with variable speed) and tilt (motorized or hydraulic). Load capacity ranges from 500 to 12,000 kg.

• Fabrikant: Heraeus - Hanau - Vötsch
• Model: Herasafe

Spanning: 230V 50/60Hz | Stroom: 340W | Uitlaatluchtfilter: H14 HEPA | Draagvermogen: 51kg | Filterefficiëntie: 99,995% van de maximaal doordringende deeltjesgrootte (MPPS) | Buitenafmetingen (b) x (d) x (h): 190...

C0 - SIEG - Draaibank

Item no: Baby Lathe | Swing over bed: 110 mm | Distance between centers: 125 mm | Hole through spindle: 10 mm | Tailstock screw: M14x1 mm | Variable speed: 100-3800 ±10% rpm | Cross slide travel: 50 mm | Motor ou...

SC4-510 - SIEG - Draaibank

Item no: Bench Lathe | Swing over bed: 210 mm | Distance between centers model 410: 410 mm | Model 510: 510 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable s...

SC6-550 - SIEG - Draaibank

Item no: Bench Lathe | Swing over bed: 250 mm | Distance between centers: 550 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable speed): 125-2000 ±10% rpm | Com...

SC3 - SIEG - Draaibankmachines

• Fabrikant: Sieg

Item no: Mini Lathe | Swing over bed: 180 mm | Afstand tussen centra: 400 mm | Distance between centers: 400 mm | Gat door spil: 20 mm | Hole through spindle: 20 mm | Cross slide reizen: 65 mm | Cross slide trave...

SX1P - SIEG - Freesmachine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

50x VSM 10047430 (115 K 60) Ronde klittenband schuurschijf

• Fabrikant: VSM

Leeftijdsclassificatie: Geen leeftijdsbeperkingen | Land van herkomst: Duitsland | Inhoud: 50 stuk | Gewicht: 2000 g | Nettogewicht: 2000 g | Douanetariefnummer: 68052000 | Merk: VSM | Type: Ronde klittenband sch...

SX2.7L - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 395 mm | Cross axis (y): 180 mm | Headstock travel (z): 290 mm | Throat: 190 mm...

2008 PANASONIC 5JD420XBB22

• Fabrikant: Panasonic

Koelvermogen: 13,4 kW | Toepassing: koeling | Koudemiddel: R410A | Nominale spanning: 280DC Volt | Opgenomen vermogen: 4,2 kW

SX2.3 - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

1998 Big Drum Modell 12 E

• Fabrikant: Big Drum

Capaciteit: 3.000 cups per hour

N.N. Chain conveyor

• Fabrikant: N.N.

Capaciteit: 7.1 m

Indag DLM2

• Fabrikant: Indag

Capaciteit: 5.000 liter per hour

C3 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Cross slide travel: 65 mm | Compound travel: 55mm | Motor output power: 350 W | Distance between centers: 350 mm | Hole through spindle: 20 mm | Spindle taper: MT3 |...

C2 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Distance between centers model 200: 200 mm | Model 300: 790x360x390 mm | Hole through spindle: 20 mm | Cross slide travel: 65 mm | Compound travel: 55 mm | Spindle t...