Gebruikte variable speed in Neremstraat 189, 3700 Tongeren-Borgloon, België

SX1P - SIEG - Freesmachine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

SX2.7L - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 395 mm | Cross axis (y): 180 mm | Headstock travel (z): 290 mm | Throat: 190 mm...

SX2.3 - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

Labor Labo Mixer

• Fabrikant: Labor

Raskin Master 50 ton

• Fabrikant: Raskin

Capaciteit: 50 ton | Koppeling: air clutch | Uitlading tot center stempel: 245 mm | Max regelbare slag: 13 > 127 mm | Doorgang tussen steunen: 340 mm | Max hoogte tussen tafel -- stempel in: 417 mm | Tafelafmetin...

Thieler 12 ton welding manipulator

• Fabrikant: Thieler

Tafelafmetingen: 1450 x 1450 mm | Aansluitspanning: 220V

King Welding positioner 10 ton

• Fabrikant: King

Lengte: 3900 mm | Breedte: 2200 mm | Hoogte: 1400 mm | Gewicht: 8 ton

Lambert-Jouty 25 ton welding manipulator

• Fabrikant: Lambert

Capaciteit: 25 ton | Tafelafmetingen: 2000 x 2000 mm

Lambert-Jouty 25 ton welding manipulator

• Fabrikant: Lambert

Capaciteit: 25 Ton on 250 mm | Gewicht: 11 ton

Aronson 5 ton

• Fabrikant: Aronson

Manipulator: yes | Capaciteit: 5 ton | Tafelafmetingen: 1200 x 1200 mm

Lambert-Jouty 500 kg manipulator

• Fabrikant: Lambert

Manipulator: yes | Capaciteit: 500 kg | Tafelafmetingen: dia 800 mm

Esab-Pema Welding manipulator 4,5 ton

• Fabrikant: Esab

Manipulator: yes | Capaciteit: 4,5 ton | Tafelafmetingen: 1400 mm

Tehag welding manipulators 12 ton

• Fabrikant: Tehag

Manipulator: 12 ton | Tafelafmetingen: 1200 x 1200 mm

C3 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Cross slide travel: 65 mm | Compound travel: 55mm | Motor output power: 350 W | Distance between centers: 350 mm | Hole through spindle: 20 mm | Spindle taper: MT3 |...

C2 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Distance between centers model 200: 200 mm | Model 300: 790x360x390 mm | Hole through spindle: 20 mm | Cross slide travel: 65 mm | Compound travel: 55 mm | Spindle t...