Gebruikte variable speed in Drunen, Nederland

C0 - SIEG - Draaibank

Item no: Baby Lathe | Swing over bed: 110 mm | Distance between centers: 125 mm | Hole through spindle: 10 mm | Tailstock screw: M14x1 mm | Variable speed: 100-3800 ±10% rpm | Cross slide travel: 50 mm | Motor ou...

SC4-510 - SIEG - Draaibank

Item no: Bench Lathe | Swing over bed: 210 mm | Distance between centers model 410: 410 mm | Model 510: 510 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable s...

SC6-550 - SIEG - Draaibank

Item no: Bench Lathe | Swing over bed: 250 mm | Distance between centers: 550 mm | Hole through spindle: 20 mm | Spindle taper: MT3 | Tailstock taper: MT2 | Spindle speed (variable speed): 125-2000 ±10% rpm | Com...

SC3 - SIEG - Draaibankmachines

• Fabrikant: Sieg

Item no: Mini Lathe | Swing over bed: 180 mm | Afstand tussen centra: 400 mm | Distance between centers: 400 mm | Gat door spil: 20 mm | Hole through spindle: 20 mm | Cross slide reizen: 65 mm | Cross slide trave...

SX1P - SIEG - Freesmachine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

Labor Labo Mixer

• Fabrikant: Labor

2008 PANASONIC 5JD420XBB22

• Fabrikant: Panasonic

Koelvermogen: 13,4 kW | Toepassing: koeling | Koudemiddel: R410A | Nominale spanning: 280DC Volt | Opgenomen vermogen: 4,2 kW

SX2.7L - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 395 mm | Cross axis (y): 180 mm | Headstock travel (z): 290 mm | Throat: 190 mm...

Raskin Master 50 ton

• Fabrikant: Raskin

Capaciteit: 50 ton | Koppeling: air clutch | Uitlading tot center stempel: 245 mm | Max regelbare slag: 13 > 127 mm | Doorgang tussen steunen: 340 mm | Max hoogte tussen tafel -- stempel in: 417 mm | Tafelafmetin...

SX2.3 - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

Thieler 12 ton welding manipulator

• Fabrikant: Thieler

Tafelafmetingen: 1450 x 1450 mm | Aansluitspanning: 220V

Aronson 5 ton

• Fabrikant: Aronson

Manipulator: yes | Capaciteit: 5 ton | Tafelafmetingen: 1200 x 1200 mm

King Welding positioner 10 ton

• Fabrikant: King

Lengte: 3900 mm | Breedte: 2200 mm | Hoogte: 1400 mm | Gewicht: 8 ton

Lambert-Jouty 25 ton welding manipulator

• Fabrikant: Lambert

Capaciteit: 25 ton | Tafelafmetingen: 2000 x 2000 mm