Gebruikte sieg

1987 Waldrich 30-10S

• Fabrikant: Waldrich Siegen

Tafel (amerikaanse standaard): 178" x 59" | Afstand tussen kolommen (amerikaanse standaard): 73.5" | Hoofdslijpkopmotor (amerikaanse standaard): 30 HP | Snelheid van de perifere slijpkop (amerikaanse standaard): ...

SC3 - SIEG - Draaibankmachines

• Fabrikant: Sieg

Item no: Mini Lathe | Swing over bed: 180 mm | Afstand tussen centra: 400 mm | Distance between centers: 400 mm | Gat door spil: 20 mm | Hole through spindle: 20 mm | Cross slide reizen: 65 mm | Cross slide trave...

WALDRICH SIEGEN - PF-F-150

• Fabrikant: Waldrich Siegen

Verplaatsing x - as: 12000 mm | Verplaatsing y - as: 7300 mm | Verplaatsing z - as: 3000 mm | Tafellengte: 12000 mm | Tafelbreedte: 4730 mm | Tafelbelasting: 250000 | Spindelopname: Milling Spindle 560...

Waldrich Siegen WWDK 80

• Fabrikant: Waldrich Siegen

Afstand tussen centra: 7500 mm | Max draaidiameter: 1900 mm | Max draaidia boven dwarsslede: 1650 mm | Vermogen op hoofdspil: 150 HP | Gewicht tussen de punten: 100 ton

SC10 - SIEG - Draaibank

Item no: Bench Lathe | Swing over bed: 305 mm | Distance between centers: 700 mm | Hole through spindle: 38mm | Spindle taper: MT5 | Spindle nose: D type | Tailstock taper: MT3 | Compound travel: 80 mm | Cross sl...

C2 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Distance between centers model 200: 200 mm | Model 300: 790x360x390 mm | Hole through spindle: 20 mm | Cross slide travel: 65 mm | Compound travel: 55 mm | Spindle t...

C0 - SIEG - Draaibank

Item no: Baby Lathe | Swing over bed: 110 mm | Distance between centers: 125 mm | Hole through spindle: 10 mm | Tailstock screw: M14x1 mm | Variable speed: 100-3800 ±10% rpm | Cross slide travel: 50 mm | Motor ou...

C3 - SIEG - Draaibank

Item no: Mini Lathe | Swing over bed: 180 mm | Cross slide travel: 65 mm | Compound travel: 55mm | Motor output power: 350 W | Distance between centers: 350 mm | Hole through spindle: 20 mm | Spindle taper: MT3 |...

SX2 - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 220 mm | Cross axis (y): 100 mm | Headstock travel (z): 180 mm | Throat: 1...

SIEG - Onderzetkast (met C3 Draaibank)

SX2LF - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 300 mm | Cross axis (y): 130 mm | Headstock travel (z): 250 mm | Throat: 1...

SX1P - SIEG - Freesmachine

Item no: Micro Mill Drill | Drilling capacity: 10 mm | End milling capacity: 10 mm | Face milling capacity: 16 mm | Longitudinal axis (x): 330 mm | Cross axis (y): 145 mm | Headstock travel (z): 195 mm | Throat: ...

SX2L - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 300 mm | Cross axis (y): 130 mm | Headstock travel (z): 180 mm | Throat: 1...

SX2.3 - SIEG - Freesmachine

Item no: Bench Mill Drill | Drilling capacity: 20 mm | Max. tapping capacity: 12 mm | End mill capacity: 16 mm | Face mill capacity: 35 mm | Longitudinal axis (x): 350 mm | Cross axis (y): 180 mm | Headstock trav...

SX2P - SIEG - Freesmachine

Item no: Mini Mill Drill | Drilling capacity: 16 mm | End milling capacity: 20 mm | Face milling capacity: 35 mm | Longitudinal axis (x): 280 mm | Cross axis (y): 140 mm | Headstock travel (z): 260 mm | Throat: 1...